Buy Sensors & Accessories in Sri Lanka
-
Sold OutLKR 50.00Piezo elements come in handy when you need to detect vibration or a knock. You can use these for tap or knock sensors pretty easily by reading the voltage on the output. They can also be used for a very small audio transducer such as a buzzer.
-
Sold OutLKR 290.00DHT11 Temperature and Humidity Sensor Module for Arduino Raspberry Pi
-
Sold OutLKR 225.00HX1838 Infrared Remote Control Module IR Receiver Module DIY Kit HX1838 for Arduino Raspberry Pi
-
Sold OutLKR 125.00Sound detection sensor module detects the intensity of sound where sound is detected via a microphone and fed into an LM393 op-amp. It comprises an onboard potentiometer to adjust the set point for sound level.
-
Sold OutLKR 40.00Thermistors Thermistor, NTC 10K ohm +/- 2% Ring Lug Assembly UL Recognized
Specifications for this item
Brand Name US Sensor
Material Other
Part Number ARMOU803-USUR1000-103G-06-L16Bupc -
Sold OutLKR 10.005mm IR LED Infrared Transmitter Light Emitting Diode
-
Sold OutLKR 26.00The TSOP1838 is a miniature IR receiver IC form the TSOP18xx series. This particular model TSOP1838 will respond to 38kHz IR signals from remote control devices.
-
Sold OutLKR 225.00HC-SR04 Ultrasonic Module Distance Measuring Transducer Sensor
-
Sold OutLKR 95.00- using the sensitive type photosensitive resistance sensor
- the comparator output signal clean waveform is good, driving ability, than 15mA.
- with adjustable potentiometer can adjust the brightness of the light detected
- working voltage 3.3V-5V
-
Sold OutLKR 490.00Pulse Sensor Heart Rate Sensor Heart Beat Pulse Sensor for Arduino & Raspberry pi
-
Sold OutLKR 325.00Ultrasonic Module HC-SRF05 Distance Measuring Transducer Sensor SRF05 new
-
Sold OutLKR 275.00Specifications:
* On-board pull-up resistors on SDA, SCL, and nCS
* On-board pull-down resistors on FSYNC and AD0
* 3-Axis Accelerometer
* Range: up to ± 16 g
* Sensitivity: up to 16,384 LSB/g
* 3-Axis Gyroscope
* Range: up to ± 2000 deg/sec
* Sensitivity: up to 131 LSB/deg/sec
* 3-Axis Magnetometer
* Range: ± 4800 μT
* Sensitivity: 0.6 μT/LSB
* Supply Voltage: 4.4 to 6.5 V or 3.3V if you solder the solder jumper near the on-board voltage regulator
* Interface: I2C
* 2C Address: 0x68 by default, 0x69 if AD0 is pulled high
* Board Dimensions: 25.5mm (1.004″) long x 15.4mm (0.606″) wide, 3mm (0.118″) inside diameter of mounting holes
* Weight: 2.72g (0.096oz) -
Sold OutLKR 30.00Resistance: 10k OHM
Weight: 3g (10pcs)
Size: 0.5 x 3.3 cm (W x H)
Temperature coefficient: -25℃~90℃
It can be applied to air conditioner device,heating device,clinical thermometer, auto – electron , electronic calendar and so on. -
Sold OutLKR 290.00Original DS18B20 Waterproof Probe Temperature Sensors with 1m Cable
-
Sold OutLKR 350.00HC-SR505 Mini Infrared PIR Motion Sensor Precise Infrared Detector Module For Arduino Body Sensor Switch Module Sensing Mode
