Female-Female Jumper cable (20cm) 1PCS

Rs 4.50

Female to female jumper wires for connecting standard 2. 54 mm header pin and also relimate connector of different type of development board. Pack consist 40 pcs of jumper wire in 10 different colour, as shown in the picture.

Out of stock

SKU: CBL--F-F

This is very handy 40-way female to female, 20 cm length of rainbow jumper wires. You will need it for making wire harnesses or jumpering between headers on PCB’s. These premium jumper wires are a little over 7.5″ (20cm) long and come in a ‘strip’ of 40 (4 pieces of each of ten colors). They have 0.1″(100 mil) sockets on either end and fit cleanly next to each other on standard-pitch 0.1″ (2.54mm) header. You can always pull the ribbon wires off to make individual jumpers, or keep them together to make neatly organized wire harnesses. And with these features, this jumper wires is very suitable for Raspberry Pi 3 board. The GPIO on Raspberry Pi 3 is pre-soldered with 20×2 header pins.

We suggest picking up some extra-long break-away header pins as well, you can stick those into the sockets to turn the cables into female-male or male-female jumpers!

Note: The length of the jumper wires is sometimes a bit longer than what is listed.

Reviews

There are no reviews yet.

Be the first to review “Female-Female Jumper cable (20cm) 1PCS”

Your email address will not be published. Required fields are marked *

0
    0
    Your Cart
    Your cart is emptyReturn to Shop
    ×