L298N Dual H Bridge Motor Driver

Rs 375.00

Start your engines! Well, you’ll need this motor driver first. If you’re creating a 2 or 4WD robot, this module will leave it and it’s motors in good hands. It’s not the smallest of it’s kind, but it packs a punch and has an enviable heat sink.

8 in stock


Double H driver module uses  L298N dual full-bridge driver, an integrated monolithic circuit in a 15- lead Multiwatt and PowerSO20 packages. It is a high voltage, high current dual full-bridge driver designed to accept standard TTL logic levels and drive inductive loads such as relays, solenoids, DC and stepping motors. Two enable inputs are provided to enable or disable the device independently of the input signals. The emitters of the  lower transistors of each bridge are connected together and the corresponding external terminal can be used for the connection of an external sensing resistor. An additional supply input is provided so that the logic works at a lower voltage.

  •  Light weight, small dimension
  • Super driver capacity
  • FWD protection
  • Heavy load Heat sink
  • 2 current probe port
  • Power selection switch
  • 4 pull up resistor switch
  • 2 DC motor/ 4 coil dual phase stepper motor output
  • Motor direction indication LED
  • 4 standard mounting hole


  • MCU controlled vehicle
  • Wheel robot

Technical Details

  • Driver: L298
  • Driver power supply: 5V~ 46V
  • Driver Io: 2A
  • Logic power output Vss: 5~ 7V (internal supply 5V)
  • Logic current: 0~36mA
  • Controlling level: Low -0.3V~1.5V, high: 2.3V~Vss
  • Enable signal level: Low -0.3V~1.5V, high: 2.3V~Vss
  • Max power: 25W (Temperature 75 cesus)
  • Working temperature: -25C~ 130C
  • Dimension: 60mm*54mm
  • Driver weight: ~48g
  • Other extensions: current probe, controlling direction indicator, pull-up resistor switch, logic part power supply.

Additional information

Weight 0.2 kg
Dimensions 6 × 6 × 6 cm


There are no reviews yet.

Be the first to review “L298N Dual H Bridge Motor Driver”

Your email address will not be published. Required fields are marked *

    Your Cart
    Your cart is emptyReturn to Shop